Konica Minolta bizhub 652 - Manual (Page 24)

3 Using AU-201H Authentication Unit
24 AU-201H
When “Card Authentication + Password” has been specified
1
Position the registered IC card on this device, and then type in the password.
2
Touch [Login] or press the [Access] key.
The user is authenticated, and the Basic screen appears.
Note:
The notification beep sounds while scanning. The notification beep is canceled by
touching [Login] or pressing the [Access] key to complete authentication. This is
a normal operation of the device.
If authentication fails many times, the authentication data may not be registered
correctly. Therefore, register the user again.