Konica Minolta bizhub 652 - Manual (Page 31)

Using AU-201H Authentication Unit 3
AU-201H 31
5
Select the “User Authentication” check box.
The User Authentication dialog box appears.
6
Select “Recipient User”, and then enter the user name and password.
7
Click the [OK] button.
8
Specify the desired settings, and then click [Print].
The print job is sent.
9
Position the registered IC card on this device.
– Make sure that “Begin Printing” is selected.
– To select the print job to be printed, touch [Screen Operation]. For details,
refer to “Selecting the print job to be printed from the control panel” on
page 32.