4 care of au-201h authentication unit, 4care of au-201h authentication unit – Konica Minolta bizhub 652 User Manual

Page 36

Advertising
background image

4

Care of AU-201H Authentication Unit

36

AU-201H

4

Care of AU-201H Authentication Unit

Caution

-

Before cleaning this device, disconnect it from the multifunctional product.
If a force is applied to the USB port, it may be damaged.

-

When cleaning this device, do not allow water to enter the device, otherwise
the system may be damaged.

-

Never use organic solvents, such as benzene or alcohol, to clean this device,
otherwise it may be damaged.

Note:

When disconnecting or connecting this device, turn off the multifunctional
product with the main power switch, and then wait at least 10 seconds before
turning it on again. The machine may not operate correctly if it is turned on
immediately after being turned off.

Hold the plug when plugging and unplugging the USB cable, otherwise the cable
may be damaged.

Frequency: Once a month, or when it is dirty

Wipe this device with a soft, dry cloth. If this device cannot be cleaned by wiping it,
wash it with a cloth dampened with a mild detergent and wrung out well. After this
device is cleaned, rinse the cloth and wring it out well before wiping off the detergent.

Advertising