Konica Minolta Fujitsu Scanner - Manual (Page 149)

4-15
4.6 Replacing the Front-side Lamp
4
REPLA
C
EMENT OF CONSUMABLES
4.6 Replacing the Front-side Lamp
1. Remove documents from the stacker. Pull up the lever on the right front
of the Upper transport and then raise it.
CAUTION
Never replace the Lamp without turning off the power.
Wait 5 minutes after turning off the power before touching the Lamp.
CAUTION
Raise the Upper transport unit fully, then lower it to engage lock before you
put your hands inside of the scanner.