Konica Minolta Fujitsu Scanner User Manual
Page 260
7-60
7.3 Setup Mode Details
27. Setting Power save mode
1) Press
(Next button) or
(Previous button) and let LCD display
<Screen27>.
<Screen27>
2) At <Screen27>, press
(Left arrow button) or
(Right arrow button)and
select [On] to use power save mode.
Next, press
(Enter button). Then the LCD display shows <Screen27-1>.
If power save mode is not required, press
(Right arrow button) and select
[Off].Then, press
(Enter button).
<Screen27-1>
3) At <Screen27-1> ,by pressing
(Left arrow button) or
(Right arrow
button), select the scanner wait idle time before entering power save mode.
A minimum of 5 minutes to the maximum of 60 minutes can be selected with 5
minutes increment.
4) Press
(Enter button) and enable to use power save mode. Finally,
press
(Exit button) and the LCD display goes back to [Ready] screen.
HINT
The blinking item is the one selected.
HINT
The default time recommended by the ENERGY STAR
®
program is 15 min-
utes.
2
7
S
o
!
a
P
r
w
e
=
v
e
2
7
e
!
2
5
1
m
T
i
=
1
1
0
0
m
i
n
-