Konica Minolta Fujitsu Scanner User Manual
Page 232
7-32
7.3 Setup Mode Details
3) At <Screen8-1>, press
(Left arrow button) or
(Right arrow button) to
select consumable error process.
By pressing
(Enter button), <Screen8-2> appears on the LCD.
<Screen8-2>
4) At <Screen8-2>, specify the number of scans to get Consumables replacement
message.
Each time
(Left arrow button) is pressed, the counter value decrements by
10,000.
Each time
(Right arrow button) is pressed, the counter value increments by
10,000.
5) Press
(Enter button) to confirm the setting.
Press
(Exit button) , and the LCD display goes back to [Ready] screen.
(1) [Stop] is blinking:
When the consumables replacement limit is
reached, the Consumables replacement mes-
sage (Abrasion alarm) is shown on the LCD and
scanning stops.
(2) [Message] is blinking: When the consumables replacement limit is
reached, the Consumables replacement mes-
sage (Abrasion alarm) is shown on the LCD but
the scanning continues.
0
8
N
C
s
!
0
T
0
m
=
A
r
l
a
0
e
t
h
0
0
e
3
-
2