Fujitsu isis scanner driver – Konica Minolta Fujitsu Scanner User Manual
Page 60
1-34
1.10 How to use the Scanner Driver
■ FUJITSU ISIS Scanner Driver
FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner
fi series by using application software that complies with the ISIS standard.
The following describes the procedure with examples of QuickScan
TM
for ordinary scanning by
using this driver software.
The procedure may vary depending on your application. If you use an application other than
QuickScan
TM
, please refer to its Guide or Help for further information.
● Procedure for Basic Scanning Operation
1.
Startup the application.
From the [Start] menu, select [Programs]-[QuickScan] and click [QuickScan].
2.
Select your scanner on the window below.
Select [Scan] - [Select Scanner] on the menu bar.
3.
Select “Fujitsu fi-4860C”, then click the [OK] button.