Konica Minolta Fujitsu Scanner User Manual
Page 250
Advertising
7-50
7.3 Setup Mode Details
21. Setting SCSI bus width
1) Press
(Next button) or
(Previous button) and let LCD display
<Screen21>.
<Screen21>
2) At <Screen21>. If Wide SCSI (68pin) interface is used, press
(Right arrow
button) and select [16].
If SCSI-2 (50pin) interface is used, press
(Left arrow button) and select [8].
3) Press
(Enter button) to confirm the setting.
Press
(Exit button) at the end and the LCD display goes back to [Ready]
screen.
HINT
The blinking item is the one selected.
ATTENTION
If 16 bit bus width data transfer is prohibited, specify 8 bit.
2
1
C
s
S
!
S
I
=
i
d
t
W
8
/
1
h
6
b
i
t
B
u
Advertising