Konica Minolta Fujitsu Scanner - Manual (Page 254)

7-54
7.3 Setup Mode Details
4) At <Screen24-1>, press (Left arrow button) or (right arrow button), and
select the setting you want to give priority.
Press (Enter button) to confirm the setting.
Press (Exit button) and the LCD display goes back to the [Ready]
screen.
Pressing (Left arrow button): “I/F” blinks and the scanner forcibly
follows the settings done on the
interface.
Pressing (Right arrow button): “Panel: Pre” or “Panel: Post” blinks and
the scanner forcibly follows the settings
done on the operator panel.
ATTENTION
This screen is displayed only when both imprinters (fi-486PRFR and
fi-486PRRE) are installed.