Konica Minolta Fujitsu Scanner - Manual (Page 236)

7-36
7.3 Setup Mode Details
10. Setting Short document scan mode(Paper Length setup)
1) Press (Next button) or (Previous button) and let the LCD display
<Screen10> .
<Screen10>
2) At <Screen10>, press (Left arrow button) or (Right arrow button) and
select the proper setting for the document to scan.
3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
HINT
The blinking item is the one selected.
(1) [Normal] is blinking: This mode is for scanning documents longer than
80mm or 3.15inches.
(2) [Short] is blinking: This mode is for scanning documents which length
is 80mm or less, 3.15inches or less.
1 0 L P ! e
o
h r
e r a
o N
p
= m S a r
n g t h
l t /