Opera t or p a nel menus – Konica Minolta Fujitsu Scanner User Manual
Page 221
7-21
7.3 Setup Mode Details
7
OPERA
T
OR P
A
NEL MENUS
3) At <Screen 4-1> you can enable or disable the Double-feed detection or
configure the detection modes by pressing
(Right arrow button) or
(Left
arrow button).
<Screen4-1>
By pressing
(Right arrow button), the selection moves from (1) to (3).
By pressing
(Left arrow button), the selection moves from (3) to (1).
4) At <Screen 4-2> you can set the detection range for Double-feed by checking
document overlapping. Press
(Left arrow button) or (Right
arrow
button)
to set the start and end positions for the detection.
<Screen 4-2>
Press
(Next button) or
(Previous button) to increase/decrease the value of
the selected item. To enable the settings, press
(Enter button).
(1) [Off] is blinking:
Document overlapping is not checked.
(2) [On] and [1] are blinking:
Document overlapping is checked for
the range set at step 4). This mode is
used for preventing mis-detection when
scanning documents that are pasted
photos, etc.
(3) [On] and [2: Full] are blinking: Document overlapping is checked for
the whole area of the
documents.(Default setting)
(1) [Top] is blinking:
The start position for the detection is set.
(2) [L] is blinking:
The detection is range set.
n
r
1
s
U
1
a
l
0
4
!
o
->
-
t
n
i
c
=
O
f
f
/
O
/
2
:
F
u
l
l
0
L
a
S
2
r
U
0
4
!
n
-
S
T
o
p
:
:
1
0
0
m
m
g
e