Konica Minolta Fujitsu Scanner - Manual (Page 136)

4-2
4.1 Consumables and Replacement Cycle
4.1 Consumables and Replacement
Cycle
The following table lists the Part No. and the standard replacement cycle of the consumables. It is
recommended that you stock extra consumables before the ones in the scanner reach the end of
Their service life. The consumables must be replaced periodically. You can check the number of
scanned pages for the Pad ASSY, the Pick roller unit, the Brake roller unit, and Print cartridge,
and you can check the cumulative lamp-on time for the Lamps by referring to each counter on this
scanner.
The replacement cycle is based on the printing on Letter/A4 woodfree paper or wood containing
paper documents (21lb [80 g/m
2
]). The replacement cycle may differ due to paper quality, print
density or paper type.
For the purchase of the consumables, please contact the FUJITSU scanner dealer where you
purchased your scanner.
Descriptions Part No. Standard replacement cycle
Lamp PA83950-0290 1,000 Hours(60,000minutes)
Pad ASSY CA04315-G730 300,000 sheets or 1 year
Pick Roller Unit PA03296-F711 300,000 sheets or 1 year
Brake Roller Unit CA04315-F705 300,000 sheets or 1 year
Print Cartridge CA00050-0262 Black ink cartridge
4,000,000 characters
ATTENTION
Use the correct Print cartridge. The Scanner may be damaged if the wrong
Print cartridge is installed.