Konica Minolta Fujitsu Scanner - Manual (Page 32)

1-6
1.3 Basic Operations of the Operator Panel
1.3 Basic Operations of the Operator
Panel
This basic operation include how to enter setup mode and test mode.
■ Clearing error messages
When an user recoverable error occurs, The “Check” LED blinks to warn you
and the error message is displayed on the LCD. Here is an example of an error
message.
Press button to clear the blinking after the cause of the error is removed.
ATTENTION
If you cannot clear errors with Check LED lit. They are not user recoverable
errors.
Refer to "Error mesage (Temporary error :Check LED blinking)" on page AP-
9 for the messages.
e D u b e l e o F d