Konica Minolta KIP C7800 - Manual (Page 20)

KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 16 -
Job List
Selected Files
Once selected all files to be printed are listed here. It includes the file name (with location structure),
pen table, stamp and fold pattern to be applied to each file. This region allows further settings to be
applied to the selected file(s).
Note: This area can be resized within the region provided.
Enlarge / Reduce / Enhanced Scaling
Using KIP Request 6.5 and above, it is possible to scale images to a paper size that is not locked to a
particular roll size.
For instance, if you have an architectural “D-Size” original that is 36 inches wide and 24 inches long
and wanted to scale this to an engineering “A-Size” that is 12 inches wide and 9 inches long, you
simply have to select the image and then choose A Size from the Enlarge/Reduce column in the
selected files area.
Other zoom settings can be applied from the Advanced Job Settings.