Konica Minolta KIP C7800 - Manual (Page 73)

KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 69 -
FolderRollSize=0
FolderPreset=2
Definitions of the .FLD
FolderOriginalOrientation
Defined as landscape =0, portrait=1, reverse landscape=2, reverse portrait=3. Unattend uses this
information combined with “FolderOutputOrientation” to calculate a final rotation parameter used in
creation of the TIF Pack bit file before printing. Note: When using the KIP Folder all images must print in
Portrait mode with title block exiting the printer last in order to fold properly and finish with the title block
showing.
FolderOutputOrientation
Defined as landscape =0, portrait=1, reverse landscape=2, reverse portrait=3. Unattend uses this
information combined with “FolderOriginalOrientation” to calculate a final rotation parameter used in
creation of the TIF Pack bit file before printing. Note: When using the KIP Folder all images must print in
Portrait mode with title block exiting the printer last in order to fold properly and finish with the title block
showing.
FolderRollSize
This is used to lock printing to a specific roll size used in folding this document. Valid values are 0=36” roll,
1=34”, 2=30”, 3=24”, 4=22”, 5=18”, 6=17”, 7=12”, 8=11”, 9=8.5” or the word “Closest”. If using a value 0-9,
the controller will prompt the user for this media size before continuing to print. This will stop the printer
and other jobs from printing until the user inserts this size of media. If “Closest” is used, the Controller will
use the media that fits the image the best after applying the rotation specified. Note: If using Force Size
feature of the Job Ticket you must also use the same Roll Size for Force Size in FolderRollSize of the .FLD
file.
FolderPreset=2
This refers to the preset in the Kipfoldpreset.ini. The settings defining packet size, margin, and fan and
cross fold settings are set in the kipfoldpreset.ini by the technician at the controller. As a feature of
Request 5 SR3, user can display the names of these settings in the new Rotate / Fold menus. The Request
obtains a copy of the kipfoldpreset.ini from the current Log Directory (Log Directory as set in Unattend,
Configuration, Miscellaneous Setup) named “presets.ini”.