Konica Minolta KIP C7800 - Manual (Page 32)

KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 28 -
Line Width Compensation Default 0.0 Line Width Compensation set to +2.0
Vector Line Dither Pattern
Users have 2 choices of vector line dither
patterns. This will alter the appearance of
vector grayscale in different ways. Fine is the
default setting. There is no ‘correct’ pattern
to choose. Users can choose the setting
they prefer.
Clip to Image Size
This crops the file data to the start of image data. Apply when the file designer has saved the entire
drawing area as part of the file. If an error “File Too Large To Print,” occurs, clipping to Image Size is
often the solution.