Konica Minolta KIP C7800 - Manual (Page 30)

KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 26 -
Resolution
Allows the selection the dots-per-inch, or resolution, for
their documents to be converted.
Border
This allows a border to be used in the file. A maximum border of five inches can be applied to each
edge.
Calcomp setup
Only use this when submitting a Calcomp language file.
This will change Calcomp file settings so that the printer
will interpret Calcomp files correctly. These settings
include Checksum, Sync Character, End of Message
Character, and Steps Per Inch. Calcomp settings only
apply to plot files with a Calcomp text header.
Load / Save
Saves changes in a custom Pen Table or load a table to
see or make changes. Save the table once the changes
have been made. The current Pen Table name is displayed at the top of the Pen Table Setup Menu.