Konica Minolta KIP C7800 - Manual (Page 7)

KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 3 -
CD Installation
1. Locate the KIP Software CD and place in disk drive.
2. Browse CD for INSTALLATION and KIP Request.
3. Follow the prompts and select all defaults settings for easy of configuration.
First Time Run
After the software installation is complete, the application can be run from the
Desktop (icon shown) or from the “Start,” then “All Programs,” then “KIP
Programs,” KIP Request. It may take several minutes for the first time launch as it
attempts to find configured KIP devices. (see Connection to KIP Printers)
WINDOWS VISTA NOTE: In order for the KIP Request to work properly on Windows
Vista you need to install the KIP Request software as Admin. To do so right click
on the Request.exe and select Install as Admin. After it installs you MUST run it the first time as Admin
(right click on the Shortcut created and choose Run as Admin) this sets up the proper pathing. You
should then be able to use the software without issues.
If you are still having issues try turning off User Account Control (UAC). This is done in Control Pane
under User Accounts there you will find Turn Account Control on or off.
Windows 7 Note: In order for the KIP Request to work properly on Windows 7 it will need to be
installed as an Admin and compatibility mode will have to be set to “Run this program as and
administrator”. If there are still issues running KIP software, User Account Control (UAC) may have to
be adjusted.
Master Password
Upon starting Request for the first time it will ask for a MASTER PASSWORD. This password allows
access to the Prompt Settings (accounting) configurations. This password will be used by the
department manager or network administrator. Please key in a password noting that it will be
required in the future. Once set the password cannot be changed.