Konica Minolta KIP C7800 - Manual (Page 33)

KIP Request Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 29 -
Use Round End Capping
This will set end capping on lines in vector files to
round ends instead of what has been specified in the
plot file’s Line Attribute command.
Turn Merge On
This enables the user to merge lines of different
shades. When not applied, the layers within the plot
file determine how lines merge on each other.
Raster Photo Mode
When a raster image has been embedded within a
plot file, Raster Photo Mode should be used.
Raster Photo Mode can be applied to all drawings,
whether they contain raster images or not. Some raster
images may need to be printed in 100% solid rather
than the original shading of the image.