Konica Minolta MAGICOLOR 2300 - Manual (Page 146)

Safety Information 138
Laser Safety Label—CDRH Requirement
CAUTION: Use of controls, adjustments, or performance other than those specified
in this manual may result in hazardous radiation exposure .
This is a semiconductor laser. The maximum power of the laser diode is 5 mW, and the wavelength is
770–795 nm.
International Notices—Power Cord
The following power cord requirements are in effect for your 220 V printer.
Minimum: 0.75 mm 2
Minimum: H05 VV - F
The male plug is certified in the country in which the equipment is to be installed, and the female plug is an
IEC 60320 connector.
International Notices—Voltage
Attention Norwegian users: This equipment is designed to operate within an IT power system where the
line-to-line voltage does not exceed 240 V.
For Norway Users
ADVERSEL
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for
unsynlig laserstråling som overskrider grensen for laser klass 1.
Dette en halvleder laser. Maksimal effekt till laserdiode er 5 mW og bølgelengde er 770–795 nm.