Konica Minolta MAGICOLOR 2300 - Manual (Page 57)

Replacing Consumables 49
Refilled Toner Cartridges
Attention
Do not use refilled toner cartridges. Any damage to the printer or quality
problems caused by a refilled toner cartridge will void your warranty.
Replacing a Toner Cartridge
Characters and images are created in your laser printer through a
photosensitive process that applies toner to the Optical Photo Conductor
(OPC) drum cartridge (which functions like photographic film). Your printer
uses four toner cartridges: black, yellow, magenta, and cyan. Handle the
toner cartridges carefully to avoid spilling toner inside the printer or on
yourself.
The toner is nontoxic. If you get toner on your hands, wash them in
cool water or a neutral detergent. If you get toner on your clothes,
lightly dust them off as much as possible. If some toner remains on
your clothes, use cool, not hot water, to rinse the toner off.
WARNING!
If you get toner in your eyes, wash it out immediately and consult a
doctor. Material Safety Data Sheets (MSDS) information can be found at
www.konicaminolta.net/printer/ (click on “Answer Base”).
Attention
Do not hold a toner cartridge vertically.
Do not touch the toner roller surface. This could
lower image quality.
Keep toner cartridges:
In their packaging until you’re ready to install them.
In a cool, dry location away from sunlight (due to the heat it generates).
The maximum storage temperature is 95 ° F (35 ° C) and the maximum
storage humidity is 85% (noncondensing). If the toner cartridge is moved
from a cold place to a warm, humid place, condensation may occur,
degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.