Konica Minolta MAGICOLOR 2300 - Manual (Page 21)

Media Types 13
Dusty
Wet (or damp)
Keep media between 35% to 85% relative humidity. Toner does
not adhere well to moist or wet paper .
Layered
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn
Too slick, too coarse, too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (356°F/180°C)
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved
Thick Stock
Paper thicker than 24 lb (90 g/m 2 ) bond is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity Tray 1 Up to 50 thick stock sheets, depending on their
thickness. Thick stock is supported only in letter,
A4, or smaller media sizes.
Orientation Face up
Type Check http://printer.konicaminolta.net/support (click on
"Answer Base") for currently approved media.
Driver
Media Type Thick stock
Weight 25–43 lb bond (91–163 g/m²)
Duplexing Not supported
Notes 43 lb (163 g/m²) bond is also referred to as 90 lb index stock.