Konica Minolta MAGICOLOR 2300 - Manual (Page 28)

Loading Media 20
Loading Media
How do I load media?
Take off the top and bottom sheets of a
ream of paper. Holding a stack of
approximately 200 sheets at a time, fan
the stack to prevent static buildup for the
paper before inserting it in a tray.
Do not fan transparencies.
Attention
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (envelopes, labels, thick stock, postcard, letterhead, or
transparencies) may adversely affect print quality or reduce engine life.
When refilling media, first remove any
media remaining in the tray. Stack it with
the new media, even the edges, then
reload it.
Tray 1 (Multipurpose Tray)
All supported media sizes and types can be printed from Tray 1.
See “Media Specifications” on page 11 for more information about media.
Plain Paper
1
If you already have media in Tray 1 and want to change it, remove the
media from Tray 1.