Konica Minolta MAGICOLOR 2300 - Manual (Page 50)

Using the Status Display 42
Printer Information—Displays the total print count, the list of installed
options and the memory size.
Supplies status—Displays consumables usage (percentage remaining)
for the toner cartridges and OPC drum cartridge.
Refer to the Status Display’s online help for information on all of its functions.
Working with the Print Menu
Power On Test—Performs an AIDC (Auto Image Density Control)
calibration cycle. Wait until the test is finished, the Ready indicator on the
control panel lights up, and the Error indicator goes off (less than 150
seconds).
Mode Setting
Duplex Density
Adjusts the density of the second side of the paper when duplex
printing.
Energy Saver
Sets the length of time until the printer enters Energy Saver mode
after it no longer receives print jobs or is not operated. If a print job is
received while the printer is in Energy Saver mode, the printer warms
up, then returns to normal print mode before starting to print.
Auto Continue
When set to On, causes the printer to continue printing even if the
specified tray is not loaded with paper of the correct size. If the Auto
Continue setting is changed during printing, the setting remains valid
for future print jobs.
Toner Empty Mode
Function that automatically repositions the carousel so that the appro-
priate toner cartridge can be removed when it is empty.
Stop mode:
Select the Toner Empty Mode check box to have the carousel auto-
matically reposition so that the empty toner cartridge can be removed
when the Black Toner or Color Toner LED is lit. While a toner LED is
lit, print jobs cannot be received. (Any print jobs sent to the printer will
be cancelled.)
Continue mode:
Clear the Toner Empty Mode check box to have the carousel automat-
ically reposition to the neutral position* when the Black Toner or Color
Toner LED is lit.
*Neutral position: The carousel is in the position where the cyan toner
cartridge can be removed.