Konica Minolta MAGICOLOR 2300 - Manual (Page 119)

Repacking the Printer 111
You can also refer to the Service & Support Guide for sources of service and
support in many areas of the world. The most up-to-date worldwide
information can be found at www.konicaminolta.net/printer/.
Repacking the Printer
Attention
Failure to follow these instructions could result in voiding your
warranty.
If you need to relocate or ship your printer after it’s been installed, follow the
procedures in this chapter to prevent damage to the printer and to keep your
warranty valid.
Attention
KONICA MINOLTA cannot be held responsible for damage to your printer
during shipment that results from the improper packaging of your
printer.
You must use the instructions given in this section before repacking the
printer in its original shipping carton with the original packing materials.
If you do not have your original packaging, you must order a KONICA
MINOLTA 2300W Replacement Packaging Kit 2600723-300.
If you’re relocating or returning the printer, you must also request a
KONICA MINOLTA 2300 Series Repacking Kit 2600733-100.
These supplies must be replaced prior to shipping the printer. If you need
replacement packaging, in the Americas, call KONICA MINOLTA Spares
at (251) 633-4300 extension 2530 and request the kit(s) above. For
locations outside the Americas, refer to www.konicaminolta.net/printer/.
If you have been instructed to return the printer to KONICA MINOLTA by a
customer support representative in the Americas, be sure to write the
RMA (Return Merchandise Authorization) number you received on the
outside of the carton and on the outside of the consumables box before
shipping the printer. If the RMA number is not prominently visible on the
outside of the return inventory, we will not accept receipt.
You can also have a KONICA MINOLTA authorized service provider
uninstall and repack your printer. For prices and availability, call 1 (877)
778-2657 in the Americas or see www.konicaminolta.net/printer/
worldwide.