Konica Minolta MAGICOLOR 2300 - Manual (Page 23)

Media Types 15
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
The face sheet must follow the plain paper specification.
The face sheet surface must cover the entire carrier sheet, and no
adhesive should come through on the surface.
You can print continuously with label paper. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Format label data within your application. Try printing your data on a plain
sheet of paper first to check placement. Check your application
documentation for other information on printing labels.
Use label sheets that are
Recommended for laser printers
Letter or A4 size (adhesive label stock)
Do not use label sheets that
Have labels that easily peel off
Have backing sheets that have peeled away or have exposed adhesive
Attention
Labels that easily peel off their backing sheetsand labels with
exposed adhesive may stick to the fuser and cause media jams.
Capacity Tray 1 Up to 50 label sheets, depending on their thickness
Orientation Face up
Type Check http://printer.konicaminolta.net/support (click on
"Answer Base") for currently approved media.
Driver
Media Type Labels
Weight 16–90 lb (60–163 g/m²)
Duplexing Not supported