Konica Minolta FK-502 User Manual

Page 105

Advertising
background image

3

Transmission

3-50

C450

Tr

an

sm

iss

ion

Chapter 3

“Hour” and “minute” of the time to start communication are
displayed in the 24-hour style, and entered in two digits.

For example: To set the time to start communication at 9:07 p.m.,
input “21” and “07.”

To release the setting, press [OFF].

5

Press [OK].

You return to the Comm. Setting screen.

6

Press [OK].

You return to the FAX screen.

7

Set other functions if necessary.

See "Setting Transmission Conditions" on page 3-11 for
information about setting functions in the FAX screen. See
"Opening the Scan Setting Screen and Comm. Setting screen" on
page 7-2 for informat
ion about setting functions in the FAX
Application screen.

8

Designate the destination(s).

For details, see "Selecting One Destination" on page 3-20.

9

Set the original document.

For details, see "Placing Originals on the Platen Glass" on
page 3-7.

10

Press [Start].

The FK-502 reads the document and holds it in memory until the
specified time when transmission starts.

!

Detail

To cancel transmission, see "Canceling Transmission" on page 3-37.

If the destination is not ready to receive, your call will be redialed. For
information about redialing, see "Recently Dialed" on page 3-29.

If transmission fails, see "Cannot Send Messages" on page 5-2.

Advertising
This manual is related to the following products: