Konica Minolta FK-502 User Manual
Page 184
Advertising
Transmission Applications
7
C450
7-47
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.19
Specifying the line for sending (Line Selection)
The Fax Multi Line should be installed.
If the Line 2 Setting of the Multi Lines Setting is set to [RX only], no line can
be specified. Refer to page 11-65 for more information on the Multi Lines
Setting.
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Press [Comm. Setting].
3
Press [Line Setting].
4
Select a line to be used in the [Line Selection].
–
If you select [No Selection], a blank line is used.
5
Press [OK].
The Comm. Setting screen will be restored.
6
Press [OK].
The FAX screen will be restored.
Advertising
This manual is related to the following products: