11 telephone line settings, 11 telephone line settings -32, Utility mode ch ap te r 11 – Konica Minolta FK-502 User Manual

Page 291: Indicates factory default setting

Advertising
background image

11

Utility Mode

11-32

C450

Utility Mode

Ch

ap

te

r 11

11.11 Telephone Line Settings

These are the options on line parameters that you can make a choice.

*1

The displays are different depending on the country.

*2

The setting value is different depending on the country.

*

indicates factory default setting.

Item

Description

Available value

Dialing Method

*1

Set the method of dialing.

PB

*

/ 10pps

Receive Mode

Set to [Auto RX] for automatic reception.
And set to [Manual RX] when a lot of tele-
phone calls are made with an external tele-
phone connected or when the remote
reception function is employed.

Auto RX

*

/ Manual RX

Number of RX
Call Rings

Set the number of receptions.
Set the number of the pseud-ringback
tones from the arrival of a message to the
start of reception.

0-15 (2 times

*

)

Number of Re-
dials

*2

Set the number of redials when no re-
sponse is available due to the other party
being busy.

0-7 (3 times

*

)

Redial Interval

Set the intervals between the redials.

1-15 (3 min.

*

)

Line Monitor
Sound

Set to ON when you want to hear the sound
on the line through the speaker while in
transmission.

ON / OFF

*

Line Monitor
Sound Volume

Set the sound volume of the speaker.

0-31 (16

*

)

Advertising
This manual is related to the following products: