3 closed network rx, Setting up closed network area reception, Closed network rx -43 – Konica Minolta FK-502 User Manual

Page 302: 3closed network rx

Advertising
background image

Utility Mode

11

C450

11-43

Utility Mode

Ch

ap

te

r 11

11.13.3Closed Network RX

The closed area reception function can be enabled or disabled.

When set to ON, set the password used for the Closed Network RX by 4
digits.

Closed area reception means that your FK-502 will receive the incoming data
only when the sender's password is valid. The FK-502 checks if the sender's
password is equal to that defined for your FK-502. If the two passwords are
different or the sender does not provide a password, a communication error
results.

*

indicates factory default setting.

Setting up closed network area reception

0

Functions incompatible with closed area reception

The use of this function is available only when the machine on the other
end is provided with the Password Transmission function.

1

Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).

2

Press [Fax Setting].

Some items may not be displayed depending on the optional
settings.

In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.

Item

Description

Available value

Closed Net-
work RX

The closed area reception is the
function used to receive the incom-
ing data only when the sender's
password is valid.

ON / OFF

*

The password is a number
of up to 4 digits.

Advertising
This manual is related to the following products: