Konica Minolta FK-502 User Manual

Page 210

Advertising
background image

Registering/Settings

10

C450

10-5

Re

gist

erin

g/

Set

ti

ngs

Chapter 10

5

Press [Name] and then enter the name of Address Book.

For the operation of the entering character, see page 14-3.

The name can be up to 24 characters.

In [No.], an unused number is displayed.

6

Enter the FAX number of the destination on the keypad.

The following key can be used.

[Tone] :

When using a rotary dialing (pulse) telephone line,
press [Tone] to select push-button tone mode. This is
used when using a FAX information service and so
forth when Tone is selected. A “T” is displayed on the
screen.

[Pause]:

Press [Pause] to insert a space in a dialed number.
Pressing [Pause] once creates an interval of one sec-
ond between numbers. Multiple spaces can also be
entered. A "P" is displayed on the screen.

[-] :

This is entered as a separation symbol when dialing.
It has no effect on dialing. A "-" is displayed on the
screen.

:

Moves the cursor to the left.

:

Moves the cursor to the right.

[Delete] :

Characters on the position of the cursor are deleted
one by one.

When the cursor is at the right end, the character are
deleted from the rear end.

[Out side] :

When the [PBX ON Set] is ON, [Out side] can be spec-
ified. By selecting it, [E-] is displayed.

Refer to p. 11-58 for more information about PBX CN
Set.

Up to 38 digits can be entered.

When an erroneous input is made, correct it by pressing [Delete] to
delete characters one at a time, or pressing [C] (clear) to delete all.

When the PBX connection is [ON] and a call is made from the
internal line to the outside line, press [Pause] after the outside line
number such as "0" so that dialing is made more surely. "P" is
displayed on the screen.

Advertising
This manual is related to the following products: