Konica Minolta FK-502 - Manual (Page 137)

6 Specifications
6-2 C450
S
p
ecific
ations
Chap
te
r 6
6 Specifications
6.1 Specifications
Main product specifications relating to facsimile functions are indicated
below.
Specifications are subject to change without notice.
* The Internal hard disk is common used of each function of the Copy, the
Scan, the Print and the Box.
Item Specifications
Image memory capacity 27 GB* (27 GB of 40 GB of the hard disk is used as a memory.)
Max. no. of stored pages Approx. 9000 pages*
(numbers of pages in the case of storing KONICA MINOLTA
standard A4-size pages containing approximately 700 characters
at “fine” resolution)
Applicable lines Subscriber telephone lines (including facsimile communication
networks)
PBX lines
Scanning line density G3
Ultra Fine:
600 dpi × 600 dpi
Super Fine: 16 dot/mm × 15.4 line/mm,
8 dot/mm × 15.4 line/mm,
400 dpi × 400 dpi
Fine: 8 dot/mm × 7.7 line/mm,
200 dpi × 200 dpi
Normal: 8 dot/mm × 3.85 line/mm
Communications are performed at any of the above scanning line
densities according to the capabilities of the destination machine.
Baud rate 2400, 4800, 7200, 9600, 12000, 14400, 16800, 19200, 21600,
24000, 26400, 28800, 31200, 33600 bps
Transmission time 2 seconds
Time if sending KONICA MINOLTA standard A4-size pages con-
taining approximately 700 characters at “normal” resolution. This
is the transmission time for the image only, and does not include
the time required for communication control. Actual communica-
tion time varies according to the contents of the originals, the type
of telephone line of the destination and factors.
Coding methods MH, MR, MMR, JBIG
Max. scanning size 11 inch × 17 inch (280 mm × 431 mm) or A3 (420 mm × 297 mm)
Width: 297 mm
Length: MAX. 432 mm
Max. recording size 11 inch × 17 inch (280 mm × 431 mm) or A3 (420 mm × 297 mm)
Originals in excess of 1000 mm cannot be received.
When receiving originals longer than the paper size in the paper
trays, printing is made according to the setting of [Print Separate
Fax Pages].