Konica Minolta FK-502 User Manual
Page 59
3
Transmission
3-4
C450
Tr
an
sm
iss
ion
Chapter 3
–
For details, see "Registering the Address Book" on page 10-3 and
"Registering the Program" on page 10-22.
–
When [Manual Destination Input] in [Security Setting] of the Utility
Mode is set to [Restrict], [Direct Input] is not displayed. For the
setting of [Manual Destination Input], contact your Administrator.
The fax number entered is displayed in the Broadcast Destinations.
5
Place the original on the machine.
–
For details, see "Placing the
Original on the Machine" on
page 3-6.
6
Press [Start].
–
When the Destination Check Display function is set to ON, the
Check Destination screen appears. Then, check the destination to
see if it is correct and press [TX]. Refer to page 7-46 for details.
–
The machine begins to scan the original and transmission starts.
–
The following screen will appear if the TX Result Report Check
screen is programmed to appear. If you want to print the TX Report,
press [Yes].