Konica Minolta FK-502 - Manual (Page 293)

11 Utility Mode
11-34 C450
Utility Mode
Ch
ap
te
r 11
4
Select the item you wish to set.
– Use or to go to the next or previous screen.
– When you want to stop the setting, press [Exit] in the sub-area.
5
Select the parameter you wish to set.
– To change [Line Monitor Sound Volume], press [Line Monitor
Sound Volume] and then [Lower] or [Higher] to set the level, and
finally press [OK].
6
Press [Close].
The value of the parameter is changed.
7
Press [Exit] on the sub-area.