Konica Minolta FK-502 - Manual (Page 174)

Transmission Applications 7
C450 7-37
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.14 ECM OFF
ECM OFF
Transmission can be made with ECM disabled. Error Correction Mode (ECM)
is a mode of transmission with error correction established by ITU-T
(International Telecommunications Union). FAX machines equipped with the
ECM feature can communicate with each other and can confirm that the data
sent is free of errors. Thus, communication can be made free from
disturbances due to line noises, etc. The FK-502 employs ECM for
transmission unless you disable it.
0 Specifications
If there are many line disturbances, the communication time may be a
little bit longer with ECM enabled than with ECM disabled.
0 Functions incompatible
Polling RX (Normal), Polling TX (Normal), V.34 OFF, Bulletin Board
Registration, Polling RX (Bulletin)
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Press [Comm. Setting].
3
Press [Line Setting].
4
Press [ECM OFF].