5 initial setting, Initial setting, Initial setting -18 – Konica Minolta FK-502 User Manual

Page 277

Advertising
background image

11

Utility Mode

11-18

C450

Utility Mode

Ch

ap

te

r 11

11.5

Initial Setting

Set the default of the Fax function.

It is possible to set a Fax function that is selected when the Main Power is
turned on or when [Reset] is pressed.

For this setting, display the Fax screen and press the [Utility/Counter] on this
screen.

*

indicates factory default setting.

Initial Setting

1

Open the User Setting screen (See "Entering User Setting" on
page 11-2)
.

2

Press [Initial Setting].

Some items may not be displayed depending on the optional
settings.

In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Initial
Setting], enter 3 through the numeric keypad.

Item

Description

Available value

Fax

[Current Setting]:
Before entering the Utility Mode, each of
the items that have been set on the touch
panel is registered as the default of fax
function.
[Factory Default]:
Values set when shipped from the factory
are registered as the default of fax function.

Current Setting / Factory
Default

*

Advertising
This manual is related to the following products: