3 setting transmission conditions, Setting transmission conditions, Setting transmission conditions -11 – Konica Minolta FK-502 User Manual
Page 66
Advertising
Transmission
3
C450
3-11
Tr
an
sm
iss
ion
Chapter 3
3.3
Setting Transmission Conditions
Original Image Type, Density, Simplex/Duplex and Resolution are displayed
when [Scan Setting] is pressed on the FAX screen. These can be used to set
transmission conditions according to the type of original to be sent.
!
Detail
The condition for transmission cannot be set in units of page.
Setting Transmission Conditions
1
Press [Scan Setting] on the FAX screen.
2
Press the key desired to be set.
–
Display on the screen varies depending on the country.
Advertising
This manual is related to the following products: