Konica Minolta FK-502 - Manual (Page 99)

3 Transmission
3-44 C450
Tr
an
sm
iss
ion
Chapter 3
3.12 Memory Transmissions and Quick Memory TX
There are two ways to send documents with this machine.
3.12.1 Memory Transmission
With Memory Transmission, all pages being sent are first scanned and stored
in memory before transmission. The document is automatically numbered by
total page number, and the images on the first page are shown on
communication results report.
However, when a large number of pages are sent or when the images on the
originals are sent at high resolution, memory overflow may occur.
The machine is automatically set to Memory TX when any of the following
procedures is performed.
-
[Quick Memory TX] is set on the Comm. Setting screen.
3.12.2 Quick Memory Transmission
In this transmission method, a facsimile is sent as soon as each page is
scanned. This allows documents to be sent without exceeding memory
capacity in the case of sending a large number of pages.