Konica Minolta IC-402 - Manual (Page 12)

12
Using the Fiery X3e System Software Service Kit
T O PRINT F IERY X3 E PAGES FROM THE C ONTROL P ANEL
1. Press the Utility/Counter button on the Control Panel and then touch the Controller
Details key on the touch panel Utility screen.
Alternatively, touch the icon in the lower-left corner of the main copier screen.
2. Make sure that the Fiery displays Idle.
F IGURE K Fiery X3e LCD info screen
3. Touch MENU to access the Functions screen.
4. Select Print Pages from the Functions screen.
5. Select PS Test Page.
The message, “Sending...” appears.
6. Examine the Test Page.
If the Test Page prints, you know that the Fiery X3e print engine is functional and that
the connection between the Fiery X3e and the print engine is good. When you examine
the Test Page, keep in mind that:
• All patches should be visible, even though they may be very faint (in the 5% and
2% range).
• Each patch set should show uniform gradation from patch to patch as the tone
lightens from 100% to 0%.
Poor image quality may indicate a need to calibrate the system or service the
print engine.
7. To print other Fiery X3e pages, such as the Configuration page, return to the Print Pages
screen and select the page that you want to print.
8. Store or post the current Configuration page near the server in an accessible location for
quick reference.
Users can find handy information on this page, such as the current Setup configuration.
Fiery X3e
Idle
xxxxMB Vx.x
MENU
Info
Close
Fiery X3e status
(Idle, RIP, etc.)
MENU
Name of screen (Info,
Functions, etc.)
4 line selection keys
(use to select
corresponding
menu item)
Up and Down arrows
(use to scroll display)
Close (use to return
to Utility screen)