Konica Minolta bizhub 36 - Manual (Page 22)

bizhub 42/36 3-2
3.1 Control Panel 3
3 Control Panel/Liquid Crystal Display
This section explains the functions of the Control Panel and liquid crystal display (touch panel) used to op-
erate this machine.
3.1 Control Panel
The following describes the keys of the Control Panel.
No. Name Description
1 Touch Panel Various screens and messages are displayed. You can configure
various settings by directly pressing the Touch Panel.
2 Power Save Press to enter Sleep Mode. While the machine is in Sleep Mode,
the indicator on the Power Save key lights up in green and the
touch panel goes off. To cancel Sleep Mode, press the Power
Save key again.
3 Fax Press this key to enter Fax mode. While the machine is in Fax
mode, the indicator on the Fax key lights up in green.
Allows you to use this function if the Fax Kit FK-509 is installed and
the fax function is available.
4 E-mail Press this key to enter Scan to E-mail mode. While the machine is
in Scan to E-mail mode, the indicator on the E-mail key lights up
in green.
For details on the Scan to E-mail function, refer to the [User's
Guide Scan Operations].
5 Folder Press this key to enter Scan to Folder mode. While the machine is
in Scan to Folder mode, the indicator on the Folder key lights up
in green.
For details on the Scan to Folder function, refer to the [User's
Guide Scan Operations].
6 Copy Press this key to enter Copy mode. While the machine is in Copy
mode, the indicator on the Copy key lights up in green.
For details on the copy function, refer to the [User's Guide Copy
Operations].
7 Reset Press this key to reset settings (except programmed settings) en-
tered using the Control Panel and Touch Panel.
1 2 3 4 5 6 7
8
9
11 12
10
17 15 16 14 13