Konica Minolta bizhub 36 - Manual (Page 59)

bizhub 42/36 6-3
6.1 Operation flow 6
Reference
- This machine cannot automatically detect the size of an original document that will be scanned. Before
scanning the document, specify its size. If the size of the original document is not correctly specified,
some parts of the image may be lost. For details on specifying the size of an original document, refer
to page 6-25.
- If the memory becomes full while the document is being scanned, scanning cannot continue. To send
the document pages that have already been scanned, press Start. To stop the transmission, press
[Cancel].
Load the original.
• Do not load more than 50 sheets and up to the point where the top of the stack is higher than the , mark at one
time. Such an action may cause an original paper jam or damage to the original. It may also invite machine failure.
However, an original that exceeds 50 pages can be scanned in separate batches.
Press Start.