Konica Minolta bizhub 36 - Manual (Page 133)

bizhub 42/36 10-5
10.2 Common reports 10
10.2.2 [TX Result Report]
The result of transmission is printed automatically. Select the print timing from Always, If TX Fails, or No in
[Admin Settings] ö [Fax Settings] ö [Fax Report] ö [TX Result Report].
10.2.3 [Broadcast Result Report]
Printed automatically when a sequential broadcast transmission is completed.
You can enable or disable this report to be printed in [Admin Settings] ö [Fax Settings] ö [Fax Report] ö
[Broadcast Report]. In addition, you can specify the printing mode (All Dest./Mode Once) in [Broadcast Result
Report].