Konica Minolta bizhub 36 - Manual (Page 44)

bizhub 42/36 5-10
5.3 Installation using Add Printer Wizard 5
5.3 Installation using Add Printer Wizard
This section describes how to install the driver using network connection (LPR/Port9100).
To use LPR/Port9100 printing, specify the port while installing the fax driver.
d
Reference
For setup procedures for other network connection methods (IPP/IPPS, Web service print), refer to the [Us-
er's Guide Print Operations].
5.3.1 Settings of this machine
Before you can use this machine through the network connection, you must configure the network settings
for this machine.
TCP/IP settings of this machine
Specify the IP address of this machine.
d
Reference
For details on setting the IP address of this machine, refer to the [User's Guide Administrator Operations].
RAW port number setting of this machine
When using Port9100 printing, in [TCP/IP Settings] of this machine, enable the RAW port and specify the
RAW port number ([9100] in the initial setting).
d
Reference
For details on specifying the RAW port number of this machine, refer to the [User's Guide Administrator Op-
erations].
LPD setting of this machine
Before using LPR printing, enable LPD in [TCP/IP Settings] of this machine.
d
Reference
For details on LPD settings of this machine, refer to the [User's Guide Administrator Operations].
5.3.2 Windows Vista/7/Server 2008/Server 2008 R2
In Windows Vista/7/Server 2008/Server 2008 R2, you can install the fax driver by searching for the printer on
the network.
0 You must have administrator privileges in order to install the fax driver.
0 Before proceeding with the installation, be sure to exit all running applications.
0 Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on. For details on the network settings, refer to the [User's Guide Administrator Oper-
ations].
1
Insert the Drivers CD-ROM into the CD-ROM drive of the computer.
2
Click [Start], and then select [Control Panel].
3
Select the printer functions from [Hardware and Sound].
% In Windows Vista/Server 2008, click [Printers] under [Hardware and Sound]. When [Control Panel]
is displayed in Classic View, double-click [Printers].
% In Windows 7/Server 2008 R2, click [View devices and printers] under [Hardware and Sound]. When
[Control Panel] is displayed in an icon view, double-click [Devices and Printers].