4 direct input, 1 fax, Direct input -11 – Konica Minolta bizhub 36 User Manual
Page 67: Fax -11, P. 6-11), Put (p. 6-11), P. 6-11
bizhub 42/36
6-11
6.4
Direct Input
6
6.4
Direct Input
Directly enter to specify the destination not registered.
Reference
-
If [Admin Settings] ö [Security Settings] ö [Security Details] ö [Manual Destination Input] is set to [Re-
strict], an address cannot be directly typed in.
d
Reference
For details on the Manual Destination Input, refer to the [User's Guide Administrator Operations].
6.4.1
Fax
Enter the fax number by using the Keypad or the panel buttons.
Reference
-
[Tone]: Press to send push-button tones when pulse dialing is being used. [T] appears in the screen.
-
[Pause]: Press to insert a pause when dialing. [P] appears in the screen.
-
[-]: Press to insert a dash as a separator symbol while dialing. This has no effect on the dialing.
After you press [OK], the screen to enter the fax number appears again if [Admin Settings] ö [Fax Settings]
ö [Fax Function Settings] ö [Cofirm Addr (TX)] is set to [ON]. Enter the fax number, and then press [OK].