Konica Minolta bizhub 36 - Manual (Page 73)

bizhub 42/36 6-17
6.7 Off-Hook (G3) 6
6.7 Off-Hook (G3)
Use this button to manually send a fax.
Reference
- Memory transmission can not be used in combination with the off-hook function.
- The separate scan function cannot be used.
- Automatic redialing cannot be used.
- Broadcasting is not available.
- Timer transmissions, F-code transmissions, password transmissions and polling reception are not be-
ing performed.
- If [Admin Settings] ö [Fax Settings] ö [Fax Function Settings] ö [Confirm Addr (TX)] is set to [ON], the
off-hook function cannot be used.
d
Reference
For details on the Cofirm Addr (TX), refer to the [User's Guide Administrator Operations].
Manual transmission
Load the original, and configure the scan setting as needed. Press [Off-Hook] to turn into the off-hook state,
and the screen appears to select the recipient.
Press [Send], select the recipient. After the fax answer tone is heard, press [Start] or press Start.
Reference
- You can specify the destinations by directly entering them or selecting them from the address book,
Log, or program destinations.