Konica Minolta bizhub 36 - Manual (Page 79)

bizhub 42/36 6-23
6.9 Settings - Comm. Settings 6
Password TX
This function sends documents with a password. If the recipient's fax machine is set to closed network re-
ception, the sender's fax machine should transmit the same password as used for the closed network recep-
tion.
You can use this function only when the remote machine is our model and supports the closed network re-
ception (with password) function.
Use the Keypad to enter the password.
Reference
- This function cannot be used together with F-code transmissions or polling reception.
F-Code TX
This function allows you send documents to a specific User Box of the remote machine by entering the SUB
address and the password. Specific User Boxes include the followings.
- Confidential TX
– Documents are sent to the Confidential RX User Box of the remote machine. Enter the destination User
Box number in the SUB Address box and the confidential transmission password in the Password box.
- Relay TX
– Documents are sent to the Relay Distribution User Box of the remote machine when the remote ma-
chine supports the relay distribution function. Enter the Relay Distribution User Box number in the SUB
Address box and the password in the Password box.
Reference
- To use the F-Code for transmission, the remote machine must support the F-Code function.
- This function cannot be used together with password transmissions or polling reception.