To specify the ntp server directly – Konica Minolta Bizhub 215 User Manual

Page 27

Advertising
background image

bizhub 215

3-16

3.4

Network Settings

3

To enable automatic detection of the NTP server using IPv6:

To enable automatic detection of the NTP server using IPv6, the other settings are specified as follows:

-

[NETWORK SETTING] ö [IPv6] ö [DISABLE/ENABLE: ENABLE]

-

[NETWORK SETTING] ö [IPv6] ö [AUTO SETTING: ON]

-

[NETWORK SETTING] ö [AUTO GET TIME] ö[ SNTP SETTING: ON]

-

[NETWORK SETTING] ö [AUTO GET TIME] ö [AUTO_DETECT_ADDR.: ENABLE]

-

[NETWORK SETTING] ö [AUTO GET TIME] ö [NTP SERVER ADDRESS: Null]

Tips

-

If the NTP server can be obtained from the DHCPv6 server, this machine first use the IPv6 address of
the NTP server assigned by the DHCP server.

1

Press +, to select [AUTO DETECT ADDR.], then press OK.

2

Press +, to select [ENABLE], then press OK.

[ACCEPTED] appears, and the screen returns to the Auto Time Settings screen.

% If [DISABLE] is selected, automatic detection is not performed.

To specify the NTP server directly:

1

Press +, to select [NTP ADDRESS SETTING], then press OK.

2

Enter the IP address of the NTP server on the keypad, then press OK.

[ACCEPTED] appears, and the screen returns to the Auto Time Settings screen.

3

To specify the NTP server port number, press +, to select [NTP PORT NO.], then press OK.

4

Enter the NTP server port number using the keypad, then press OK.

[ACCEPTED] appears, and the screen returns to the Auto Time Settings screen.

5

Press the Reset key.

Receive the time data from the NTP server, and set the time on this machine.

Advertising