Konica Minolta Bizhub 215 - Manual (Page 50)

bizhub 215 4-10
4.3 Administrator mode 4
4.3.7 [System] - [Maintenance] - [Initialize]
You can update the firmware of the network card and image controller or initialize it to the factory default.
[Firmware Update]
You can update the firmware of the network card and image controller.
For the update file, contact your service representative.
1
Click [Browse] and select a file you want to update.
2
Click [Send].
The firmware is updated.
NOTICE
Note that the current settings of PageScope Web Connection will be lost.
[Restore Factory Default]
You can initialize the Network Card and Image Controller to the factory default.
1
Click [Restore] next to [Printer Controller] or [NIC].
2
When the confirmation dialog box appears, click [Yes].
% When you do not want to initialize, click [No].
NOTICE
If you initialize the setting, the job currently being processed is not saved.
Note that the current settings of PageScope Web Connection will be lost.
You can initialize the printer control only when Image Controller IC-209 is installed.