Konica Minolta Bizhub 215 - Manual (Page 75)

bizhub 215 4-35
4.3 Administrator mode 4
4.3.28 [Network] - [IPv6 Configuration]
Configure the IPv6 configuration of the network.
Configure the settings and click [Apply] to apply the change.
Tips
- To change the settings of the [Network] tab, click [Apply]. After the message [Update Successful] is dis-
played, in the [System] tab - [Maintenance] menu - [NIC and Printer Controller Reset], click [Reset]. Oth-
erwise, the change in settings is not enabled.
Item Description
[Use IPv6] Select this check box to use IPv6.
[IPv6 Link-Local Address] The link-local address is displayed.
[Prefix Length] The prefix length is displayed.
[Use IPv6 Auto Setting] Select this check box to use IPv6 Auto Setting.
[IPv6 Stateless Address] The stateless address is displayed.
[Prefix Length] The prefix length is displayed.
[IPv6 Global Address] When you configure IPv6 manually, specify the global address.
[Prefix Length] When you configure IPv6 manually, specify the prefix length.
[IPv6 Gateway Address] When you configure IPv6 manually, specify the gateway address.
[Use DHCPv6] Select this check box to use DHCPv6.
[IPv6 Stateful Address] Stateful Address is displayed.
[Prefix Length] The prefix length is displayed.
[Enable IPv6 DNS Server] Select this check box to use DNS.
[IPv6 DNS Server Address] If the [Enable IPv6 DNS Server] check box is selected, specify the
IP address of the DNS server.