Konica Minolta Bizhub 215 - Manual (Page 81)

bizhub 215 4-41
4.3 Administrator mode 4
4.3.32 [Network] - [WSD Configuration]
Configure the WSD configuration of the network.
Configure the settings and click [Apply] to apply the change.
Tips
- To change the settings of the [Network] tab, click [Apply]. After the message [Update Successful] is dis-
played, in the [System] tab - [Maintenance] menu - [NIC and Printer Controller Reset], click [Reset]. Oth-
erwise, the change in settings is not enabled.
Item Description
[Use WSD Browsing] To use the WSD browsing, select [enable].